Product Case | Tuochuang Technology's seepage-coupled true triaxial testing system effectively assists supercritical CO₂ pulse fracturing to improve coalbed methane extraction efficiency
Release Time:
2024-08-19
Researchers have combined pulsating fracturing with supercritical CO₂ fracturing, proposing a new approach to using supercritical CO₂ pulsating fracturing on coal (rock), opening new avenues for the efficient extraction of coalbed methane. Based on this conclusion, Tuochuang Technology has independently developed a true triaxial experimental system coupling supercritical CO₂ pulsating fracturing and seepage, capable of withstanding high temperature, high pressure, high stress, and low permeability.
Coalbed methane, as an unconventional natural gas, holds an important position in China's energy structure. However, due to the low permeability of coal seams, the extraction efficiency of coalbed methane is not satisfactory. To effectively enhance the extraction effect, researchers have combined pulsating fracturing with supercritical CO₂ fracturing, proposing a new approach of using supercritical CO₂ pulsating fracturing on coal (rock), opening new avenues for efficient coalbed methane extraction.
Regarding the feasibility of this technology, Top Creation Technology independently developed a true triaxial test system coupling supercritical CO₂ pulsating fracturing and seepage, capable of withstanding high temperature, high pressure, high stress, and low permeability.

—— Test System Development ——
Test system development
The main components of this test system include a true triaxial model system, supercritical CO₂ pulsating fracturing system, CO₂ breakthrough pressure test system, gas pressurization system, outlet metering system, and vacuum system.
The true triaxial model system uses an internal piston loading structure inside the chamber, with the sample installed inside. Six piston loading devices are installed around and above and below the sample, as shown in the figure. The three-direction loading devices all use independent servo systems and a central digital control system, enabling both synchronous and asynchronous loading. Moreover, this device can apply uniform pressure in three directions on the specimen surface, effectively eliminating shear stress caused by compressive deformation on the specimen surface.

(True triaxial model system)
The compression plate of this model also reserves holes for acoustic emission probes and temperature control probes to facilitate connection to the acoustic emission system and temperature control system, as shown in the figure. The sample corresponding to the compression plate is a cubic column with a side length of 100 mm. Before the seepage test, the sample is sealed with a corner-sealing copper sleeve, then a simulated fracturing hole is pre-embedded. The pre-embedded position is at a depth of 50 mm in the center of the sample, with a drilled hole diameter of 11 mm, as shown in the figure.

(Copper sleeve sealed sample)
The independent servo system controlling the three-direction loading device is a high-precision constant speed and constant pressure pump. This pump uses a digital positioning monitoring servo control circuit, allowing the solution to flow precisely under any pressure condition and ensuring smooth high-speed flow. Its internal structure and physical appearance are shown in the figure.

(High-precision constant speed and constant pressure pump)
The supercritical CO₂ pulsating fracturing system mainly includes a pulsating fracturing pump, refrigerated water bath, cooling coil, high-pressure CO₂ storage tank, and preheater.

(Supercritical CO₂ pulsating fracturing system)
The pulsating fracturing pump is a dual-pump constant speed and constant pressure pump, featuring three motion modes: single-cylinder operation, dual-cylinder parallel, and dual-cylinder series, capable of achieving pulsating pressure supply. The refrigerated water bath contains cooling coils and a high-pressure CO₂ storage tank, mainly used to rapidly and fully convert gaseous CO₂ into liquid under high pressure and low temperature, storing it in the storage tank. The preheater uses coil-type electric heating to heat liquid CO₂ to supercritical CO₂.
Breakthrough pressure is an important parameter for evaluating the sealing capacity of the caprock. This system is used to analyze the geological sealing effect of the caprock on CO₂ and helps analyze the main mechanisms of caprock sealing failure caused by CO₂ injection.
The system mainly includes a U-shaped tube, high-precision photoelectric sensor, and signal acquisition software, used to detect the first bubble, as shown in the figure.

(CO₂ breakthrough pressure test system)
The working principle of this system: a certain amount of water/oil is injected into the U-shaped tube. The high-precision photoelectric sensor emits infrared radiation. When gas breaks through the rock and enters the U-shaped tube, the first bubble forms and bursts, causing fluctuations in the liquid level of the U-shaped tube. The light emitted by the photoelectric sensor passes through the liquid but does not reach the photodetector. The signal acquisition software reads the time point of the sensor change, thereby reading the displacement pressure measured by the pressure sensor when the gas breaks through the rock.
The main function of the gas pressurization system is to increase the low-pressure gas in the cylinder to high pressure to improve gas utilization. The system includes gas (CH4/CO₂) cylinders, gas pressurization pumps, high-pressure storage tanks, silent air compressors, and gas pressure reducing valves, as shown in the figure.

(Gas pressurization system)
Among them, the gas pressurization pump is a GB series compressed air single-drive single-acting gas pressurization pump, mainly used for pressurizing gases such as CO₂, CH4, and N₂. The high-pressure storage tank is a ZR-I type high-pressure vessel used for storing pressurized and recovered gases; the air compressor is an Otsus OTS-950×3 silent air compressor, equipped with a 65 L gas storage tank for storing driving gas, which can avoid frequent starts of the air compressor; the gas pressure reducing valve is a Tescom brand 26-1000 series, mainly used to control the pressure of the injected gas.
The supercritical CO₂ pulsating fracturing-seepage coupling true triaxial test system also includes a computer acquisition and processing system, acoustic emission acquisition system, outlet metering system, and vacuum system.
The computer acquisition and processing system is mainly used for real-time collection of values from pressure sensors, temperature sensors, etc., and can also set, control, and display triaxial pressures. The three axes can simultaneously achieve continuous automatic pressurization, maintaining stable pressure after reaching the set value, and quickly recording data such as pressure, flow, and temperature in real time. The acoustic emission acquisition system can monitor the crack evolution during the fracturing process of the specimen in real time. The outlet metering system consists of an electronic balance and a gas mass flow meter; the electronic balance measures the volume of outlet liquid, and the gas mass flow meter measures the outlet gas flow. The vacuum system is mainly used to evacuate the pressure chamber cavity and the specimen seepage pipeline.

( Other systems )
-- System Features and Functions --
System features and functions
The supercritical CO₂ pulsating fracturing-percolation coupled true triaxial testing system is an organic integration of pulsating fracturing, supercritical CO₂ fracturing, percolation, and true triaxial testing systems, characterized by high precision, full-process, true triaxial capability, and the ability to withstand high temperature, high pressure, and high stress.
(1) Simulating single-phase (containing CH4, CO₂) and multiphase fluid displacement of coal (rock) samples under deep formation high temperature (room temperature to 180°C) and high pressure (0–140 MPa) conditions. The model can achieve "six-face" variable loading through a servo hydraulic loading system, more closely approximating the stress environment of deep formations.
(2) Conducting supercritical CO₂ pulsating displacement tests and fracturing tests to further analyze the displacement effects of gaseous and supercritical CO₂ on gas, and to study the generation, propagation of pulsating stress waves, and the damage mechanisms to coal (rock) bodies during pulsating fracturing.
(3) Automatically monitoring the pressure pulses, temperature, and other time-varying patterns of the upper and lower flows of coal samples; measuring the steady-state permeability and pulse attenuation permeability of coal (rock) (studying the attenuation patterns of pressure pulses under gas-containing coal adsorption environments). It can also perform gas-liquid two-phase displacement (relative permeability) tests, monitor micro liquid flow at the outlet, and plot the gas-liquid relative permeability curves of coal (rock) samples.
-- Results and Conclusions --
Results and Conclusion
Based on this system, researchers conducted indoor true triaxial supercritical CO₂ pulsating fracturing-percolation tests and supercritical CO₂ pulsating fracturing-acoustic emission monitoring tests. The test results show that the supercritical CO₂ pulsating fracturing-percolation coupled true triaxial testing system can achieve excellent pulsating fracturing functionality.

After supercritical CO₂ pulsating fracturing, the permeability of the coal body significantly increased by 2 to 9 times compared to before fracturing, and the coal permeability exhibited a good exponential variation pattern. This indicates that supercritical CO₂ pulsating fracturing can effectively improve coal seam permeability, creating favorable conditions for coalbed methane desorption and flow.
During the acoustic emission-supercritical CO₂ pulsating fracturing period, new fracture channels were generated in the coal body, directly connecting the fracturing hole center to the coal sample surface, and supercritical CO₂ fluid was observed to jet directly from the coal. This fully demonstrates that supercritical CO₂ pulsating fracturing has a certain effect in expanding and connecting fractures, effectively enhancing coalbed methane extraction efficiency.
Related News

